 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have the Bryant 352MAV 2-stage furnace that is giving me problems: When the thermostat is set below the target temperature i.e. 19C/68F the LED code indicator (on the logic board) is steady ON, once the target temperature is set i.e. 24C/78F , the inductor motor comes on for perhaps 15 sec, then...
Hello everyone, I have Bryant 352MAV furnace. There are no indicated fault codes, but it does not want to heat. I can manually switch on the fan without heat. I have tried to reset it by cycling the control switch/gas valve/electrical switch with no results. Same with the flame roll out switch....
Am having a problem with my Bryant 352MAV furnace. Intermittently, the furnace will fail to "run" and the status LED flashes a code 32. I did some troubleshooting on this a year ago and things seemed to be fine but now it's acting up again. Originally I disconnected all of the small diameter...
Hi, new here... but will definitely be bookmarking this for future use... I just got done with school in HAC&R but I am just now beginning my job hunting in my field and I really haven't had a chance to apply the knowledge I've learned. I work on a farm and am basically the property caretaker....
Our furnace worked last night but this AM it didn't. It's a 3 year old Bryant 352MAV, installed horizontally. It's giving error 32. I've spent much of the day working with it. I'm more than handy but don't really know much about hvac. I found that the idiots that installed it (and who are now...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
