Ask Experts Questions for FREE Help !
Ask
    SominWB's Avatar
    SominWB Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 30, 2009, 08:10 AM
    Bryant 352MAV with No Fault codes and no heat either...
    Hello everyone, I have Bryant 352MAV furnace. There are no indicated fault codes, but it does not want to heat. I can manually switch on the fan without heat. I have tried to reset it by cycling the control switch/gas valve/electrical switch with no results. Same with the flame roll out switch. The fuses are all OK. Does anyone have any suggestions?

    Som
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 30, 2009, 10:53 AM
    Try jumpering the R or RH and W terminals on the thermostat terminal strip.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant 352MAV Code 32 [ 6 Answers ]

Am having a problem with my Bryant 352MAV furnace. Intermittently, the furnace will fail to "run" and the status LED flashes a code 32. I did some troubleshooting on this a year ago and things seemed to be fine but now it's acting up again. Originally I disconnected all of the small diameter...

Replaced induced draft blower on Bryant 352MAV is noisy [ 4 Answers ]

A couple of months ago some of you here helped me to diagnose a 3 year old Bryant 352MAV that was giving error code 32. I replaced the induced draft blower and it's working fine. That thread is called "Bryant 352MAV and error code 32" However I'm not sure about the fan on the induced draft...

Bryant 352MAV Problems - Solution? [ 3 Answers ]

Hi, new here... but will definitely be bookmarking this for future use... I just got done with school in HAC&R but I am just now beginning my job hunting in my field and I really haven't had a chance to apply the knowledge I've learned. I work on a farm and am basically the property caretaker....

Bryant 352MAV and error code 32 [ 49 Answers ]

Our furnace worked last night but this AM it didn't. It's a 3 year old Bryant 352MAV, installed horizontally. It's giving error 32. I've spent much of the day working with it. I'm more than handy but don't really know much about hvac. I found that the idiots that installed it (and who are now...

Air Bag fault codes [ 1 Answers ]

I have a 1993 Mercury Grand Marquis 4.6 liter V-8 and automatic transmission. The air bag dash light is flashing an error code of 12, one flash, pause, followed by two flashes, long pause and repeats, repeats, repeats. The code is apparently indicating that the battery voltage droped below 9...

View more questions Search