 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to replace a Trane Baystat 240A 33AAT82B1B1 with a Honeywell THD220D
Replacing a Trane Model Baystat 240A 3AAT82B1B1 thermostat with a Honeywell TH6220D1002 on My Trane XE1200 heat pump with aux and emer heat. Baystat has G, Y, X2, T, R, O, and F with W and U jumpered. Honeywell has Rc, R Y, C, O/B G, Aux, E and L. Which should go to which?. Thanks, James Murray
|
||||
Check out some similar questions!
I am replacing a Trane Baystat 239 thermostat with a Honeywell TH3210D1004 thermostat. The Trane thermostat is wired is follows: Terminal Color of Wire X2 Black O Orange G Green Y Yellow T Tan R ...
Can I replace the trane baystat240 with a honeywell rth230b
Whoever can help me with this issue I would greatly appreciate it. I have a Trane Weathertron thermostat and I want to replace it with a Honeywell 7600d programmable thermostat. I have an issue. When I installed the thermostat is only pumped out cold air while in heat mode. I have a heat pump...
I just replaced my old Trane Weathertron (Baystat 339) mercury thermostat with a Honeywell RTH2410. Everything appears to be working fine, but I'm concerned about a few things... I had to tape off the Blue and Tan wires because there was no connections available on the new Honeywell. Also, the...
I have searched and searched and find lots of thing for both of these units, but there is always one thing different. So I will try to explain what I have learned and what I am still confused about. The Honeywell T8411R was given to me, has no instructions and the person that gave it to me said...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
