Ask Experts Questions for FREE Help !
Ask
    foxpaws7's Avatar
    foxpaws7 Posts: 2, Reputation: 1
    New Member
     
    #1

    Feb 13, 2010, 01:13 PM
    Can I replace the trane baystat240 with honeywell rth230b?
    Can I replace the trane baystat240 with a honeywell rth230b
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Feb 13, 2010, 01:17 PM
    Read for yourself

    http://customer.honeywell.com/techli...it/69-1800.pdf
    foxpaws7's Avatar
    foxpaws7 Posts: 2, Reputation: 1
    New Member
     
    #3

    Feb 14, 2010, 06:39 AM
    Quote Originally Posted by hvac1000 View Post
    Thank you for your reply... but, I have the same info... it came with the thermostat and does not show what I need to know.
    johnair77's Avatar
    johnair77 Posts: 59, Reputation: 1
    Junior Member
     
    #4

    Feb 14, 2010, 01:47 PM

    Is the trane t-stat actually a sensor with communication wires? If so you would need a conventional t-stat interface circuit board.. that is what is done on rtu's..

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need a replacement thermostat for a Trane Baystat240 [ 2 Answers ]

Good evening all, Can anyone tell me or point me in the right direction for a replacement thermostat for an old Trane Baystat240?

Trane to honeywell RTH230B [ 1 Answers ]

I have a trane with 6 wires... g, o, x2, y, t, r, and w. and I am trying to connect it to a honeywell with Rh, Rc, W, Y, and G. I have no idea where the extra wires go. I figured the green yellow and white, and now I have brown, red, and black left.

Honeywell 7400 to replace a weathertron Baystat240 [ 2 Answers ]

I replaced the weathertron baystat240 with the honeywell 7400. Taped off the brown (T) cable and the rest went in their corresponding letters. After setting up the system nothing happens. It does not run. My system is a trane XE1000 Heat pump

Converting Trane BAYSTAT240 to Honeywell TH5220D thermostat [ 1 Answers ]

I'm trying to convert to a programmable Honeywell Thermostat. BAYSTAT240 uses: Red R 24vac Brown T Thermister Orange O Reversing valve for cooling Green G Fan Yellow Y Compressor Black X2 Heat Strip = E Blue B Common = C White ...

Replacing Trane Baystat240 with Honeywell RTH3100c [ 3 Answers ]

I have recently acquired a residence that had a much older HA/C unit. The thermostat is a TRANE Baystat240 (3AAT80B1A1). Up till now it worked well. Recently both the heat and air were blowing at the same time. Go figure! LOL. I have recently attempted to replace the thermostat with a Honeywell...


View more questions Search