 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Coleman Evco Furnace don't work
I have a Coleman Evcon model DGAT070BDD furnace. With the thermostat turned up all the way, and the ventalate setting on auto, it won't fire up or blow air. THe blend air box on the front of the unit just humms (loudly, but if I tap it with a finger, it gets much quieter). When I move the ventalate setting to on at the thurmostate,the blower kicks in and it blows cold air from the floor vents. There is no ignitor glow or flame. There is no trouble light flashing(no green light at all). I pulled the ignitor out, and it is intact,(I replaced it last November).
Thanks , Derryl |
||||
Check out some similar questions!
I have a Coleman Evcon model # dgat070bdd that is'nt working. When I kick up the thermostat, a fan kicks in (combustion air fan),it runs for aprox. 60 sec. than there is a click followed shortly by a thunk from the gas valve. After a bit, the gas valve thunk again, shortly after that the whole...
My evco flashes 3 green lights saying it's a combustion air switch is not closed I replaced it but get same 3 green flashes.
I have a manufactured home with a Coleman Elec. Furnace/AC and the blower won't turn on when the AC is running but the blower works when the heat is on. I am confused. Can someone help me with this problem? Thanks
I have a coleman 7900b furnace that will run on continuous but the blower will not kick on on automatic. It works fine on the air conditioner setting but will not on the heater setting. Any suggestions?
Coleman evcon model #bgm075166 Here is process: I turn to temp with thermostat Furnace comes on and there's a click for the ignitor Ignitor glows then flame is started Ignitor clicks then turns off Then the flame cuts off shortly after the ignitor does The furnace then retries to ignite 2...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
