 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Any ideas why my Dyson (upright) is not sucking up through the hose on the handle?:confused:
I notice there are a few "experts" on these vacuums. Mine sucks great, the belt id fine, the brush cylinder turns by hand, but the brush does not turn when running, like as though the spindle from the motor has become disconnects. The brush did clog up with hair some time ago - perhaps this has...
I have a Dyson DC07. It won't pick anything up although the motor is working okay. I have cleared all the obvious areas and have washed the filter. Although after clearing these areas, it will pick up with very weak suction for a few minutes using the attachment, it then stops and I end up...
My dc04 Dyson hoover will not pick up through the floor plate, it only works by using the hose. The belt is still in tact so it has nothing to do with that. At the same time the click mechanism which ensures the hoover stays upright when using the hose or when you have finished using the hoover,...
View more questions Search
|
