Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #21

    Feb 12, 2009, 09:57 AM
    That is the standard reply for all manufactures in the HVAC trade.
    Bucktail's Avatar
    Bucktail Posts: 12, Reputation: 1
    New Member
    		  
    #22

    Feb 3, 2012, 01:16 PM
    Same furnace different problem now. Limit switch went out. It had a Texas Instruments L170-30 7 inch switch. What I found odd was that the middle of the switch had what looks like burn marks and some cracking from appears to be too much heat. When I contacted the local furnace guy he was surprised that it used a 7" switch and not a 3". With the burn marks I begin to wonder if it's right. My Furnace guy was not able to find a L170-30 so I have a 7" L160-30 installed.

    I was having a hard time even locating info on this furnace. Anyone have access to figure out what the correct switch should be?
    Bucktail's Avatar
    Bucktail Posts: 12, Reputation: 1
    New Member
    		  
    #23

    Feb 3, 2012, 02:08 PM
    Same furnace different problem now. Limit switch went out. It had a Texas Instruments L170-30 7 inch switch. What I found odd was that the middle of the switch had what looks like burn marks and some cracking from appears to be too much heat. When I contacted the local furnace guy he was surprised that it used a 7" switch and not a 3". With the burn marks I begin to wonder if it's right. My Furnace guy was not able to find a L170-30 so I have a 7" L160-30 installed.

    I was having a hard time even locating info on this furnace. Anyone have access to figure out what the correct switch should be?
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman 4 ton HP [ 7 Answers ]

I have a Goodman 4 ton HP CPJ60-1. Outside unit was coming on but the inside blower motor did not come on. Now the outside unit does not come on at all in either mode. Where should I look?

Goodman a/c DIY [ 5 Answers ]

Hi again everyone. I found a couple of online sites that offer do it yourselfers the opportunity to install a complete a/c unit. The brand that is offered on these sites is Goodman. I have redone all the plumbing and electrical in my house so I don't think this would be too big of a hassle. I...

Goodman a/c [ 1 Answers ]

Heyi'm new at this. Looking for wiring diagram for goodman a/c phkj 060-1 a/c heat pump. All I can find on the internet are questions & more questions. Thanks in Advance triggerjunbug, ala.

Goodman [ 2 Answers ]

I'm shopping for a new forced air furnace. The lowest price I have is for a high efficiency furnace made by Goodman. Never heard of this manufacturer. What is the quality rating for Goodman high efficiency furnaces? Thanks

View more questions Search