Ask Experts Questions for FREE Help !
Ask
    ogunjobi's Avatar
    ogunjobi Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 1, 2012, 07:42 AM
    Fan blower of a boiler
    What is the cause, if motor bearing is being charttered in fan blower of a boiler
    SeattlePioneer's Avatar
    SeattlePioneer Posts: 97, Reputation: 9
    Junior Member
    		  
    #2

    Feb 1, 2012, 02:21 PM
    Remove the inducer motor assembly from the boiler. Look for plugged or broken fan blades. Turn the fan to see if it turns freely. If it doesn't replace it.

    Check the voltage to the inducer motor, which should be aqbout 120 VAC.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Boiler blower comes on with override but not otherwise [ 7 Answers ]

Boiler blower comes on when I hit the override but not otherwise. Zone controls are calling for heat but blower won't start. Can I fix myself?

T-start fan on/furnace blower on, AC w/fan on/auto, blower off [ 8 Answers ]

If no cool or heat, just fan on, there has blower start in furnace; While in air conditioner, regardless fan on or auto, there will be no indoor blower on at all; While outside condenser and its fan seems fine. I lready jump wires G, RC and Y in T-start, won't see any difference. By the...

How to test a fan limit on a boiler [ 1 Answers ]

Hi everybody I have got a boiler which carries a cam stat fan limit . How do you try to check it out to make sure it is still working fine and will shut down the boiler when the temp has gone off the set point . Any comments welcome .

PVC Pipe Leakage, furnace Fan Does Not Stop, Blower Fan Works for 5 MIN and stops [ 1 Answers ]

1) I had water DRAINING from the furnace in the attic... it overflowed... the pan under furnace was beyond full. 2) I noticed leakage from one of the PVC pipes. 3) I simply replace the PVC pipe where water was leaking, but I forgot to put the PVC CEMENT. 4) I went to turn of the AC...

Wiring hydro air and heat on the blower and boiler [ 3 Answers ]

Hi , I would like to know where do I make the connection on the blower unit for my hydro air - heat, when I use a aquastat to turn on the blower to operate during the heating cycle, is this the correct way of doing this. And also were do I hook up the wires on the boiler side I`am a bit lost when...

View more questions Search