Ask Experts Questions for FREE Help !
Ask
    eddgary's Avatar
    eddgary Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 31, 2012, 04:34 AM
    Quatro consolidated industries furnace flame seņor
    Furnace will not turn on
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jan 31, 2012, 06:39 AM
    You need to get in front with the door where the burners open, have someone to turn on and see what the sequence of what works and when the steps stop,, 1st make sure there is power at the unit

    Let us know,, more info is needed
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Burner limit circuit open on a quatro consolidated furnace model MBA 100 NH3R, HELP? [ 2 Answers ]

I have a burner limit circuit open code on my quatro by consolidated industries furnace model number MBA 100 NH3R. I have tested the burner limit switches and the primary limit switch. All 3 seem to be working. The condensate line was clogged over the summer from the air conditioner, which caused...

I need the seņor for the XE60 trane gas furnace the seņor I need is slightly above the [ 0 Answers ]

https://www.askmehelpdesk.com/go/explore.php?do=showthread&t=268859&p=1&sort=newest I need the sensor for the XE60 trane gas furnace. In the link above the sensor is pictured slightly above the pilot button to the rear.

Quatro Consolidated Industries heater [ 4 Answers ]

The heater lights up and the fan motors turn on, I can see all burners are lit but the heater does not go to the next step of blowing the hot air through the ducks it turns of and the timer led flashes twice and that indicates a primary limit circuit open error. This heater is 16 years old and in...

Consolidated industries furnace true blue 90 quatro gas valve [ 0 Answers ]

Hoe do you replace the gas valve?

View more questions Search