 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I need the seņor for the XE60 trane gas furnace the seņor i need is slightly above the
https://www.askmehelpdesk.com/go/explore.php?do=showthread&t=268859&p=1&sort=newest
I need the sensor for the XE60 trane gas furnace. In the link above the sensor is pictured slightly above the pilot button to the rear. |
||||
Check out some similar questions!
The light is coming on for an 02 Nissan Altima. Changed both 02 sensors but still getting light. Saying closed loop. Any ideas. Thanks
Pilot lit, thermostat OK, furnace won't light.
I have trane gas Furnace and its stopped working the pilot is not working its keep shutting off and also the switch on and off is working but the pilot and burner is not working what should I do ?:(
Hi, I read that the problem with my garage door not closing could be a problem with the garage door seņor. If I hold down the control the door will shut but if I release it before it shuts then it will start to go up. I noticed that the light on the sending sensor is blinking. I was...
Hey I hope there is someone out there that can help me out I am in some real bad shape. I was in the process of installing a new O2 sensor in my 1991 Honda Prelude 2.0 SI. I had to cut the wires on the old one to get it removed. When I had the new one put in I was going to connect the wire...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
