 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I put in a new diverter and now it doesn't work the pipes just clunk when the diverter is turn in either direction.
What do you do when the existing space for the tub is not square? I have 1.75 inches on one end and 1.25 inches on the front right corner. Is it best to fir out the walls to correct?
We have a basement bathroom that contained a shower, but would like to replace the shower with a tub since we have sufficient room. The current shower drain is directly in front of a cement pony wall (front to back 4 level split level home) so I'm not sure how we get under the tub to install the...
I have a american standard whirlpooltub that was installed by a contractor and there is no support material under the tub. It is supported by the rim only. And it is leaking. Where coulkd it be leaking from?
I am finishing my basement, including a full bath that was roughed in by the builder, and I have a few questions about the bathtub install (a basic 30"x60" porcelain over steel tub). 1. When I attach the drain underneath it raises the tub up slightly. Do I need to shim the tub up, or is...
View more questions Search
|
