Ask Experts Questions for FREE Help !
Ask
    gray avalon's Avatar
    gray avalon Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 23, 2009, 06:01 PM
    Bathtub diverter installation
    I put in a new diverter and now it doesn't work the pipes just clunk when the diverter is turn in either direction.

Check out some similar questions!

Bathtub Diverter Stems [ 7 Answers ]

Where would I purchase a diverter stem, ours still leaks water through the handle when it is pulled out, I don't know if the seal is bad. But do I need to replace the diverter? And where can I purchase one?

Grohe bathtub diverter [ 0 Answers ]

Has this happened to anyone else? My Grohe tub diverter will no longer do the auto shut off when you turn the water off from having a shower. What could be the problem? It worked fine for about the first 2 years, now that's its going on 5 years old and hasn't worked right for the last 3 years. ...

Bathtub Diverter Replacement [ 2 Answers ]

My problem IS in the diverter. Not matter what you do with the push down valve, most of the water still exits the tub faucet & very little exits the shower faucet. My research has shown that there are 2 types of diverter spouts: slip-on & threaded. Mine must be a slip-on because I feel an...

Replace leaking bathtub diverter [ 1 Answers ]

The diverter for our guest bath leaks like a sieve, diverting very little water to the shower. The tub/shower set is American Standard, about 20 years old. I have seen SpeedBall1's picture in response to a post by EJJ88 showing that if there is a slot near the wall, you can remove the spout using...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.