Ask Experts Questions for FREE Help !
Ask
    danielwinfree's Avatar
    danielwinfree Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 28, 2012, 12:55 PM
    1991 honda accord not firing after changing head gasket
    I changed the head gasket on a 1991 honda accord LX 2.2 16 valve and when it was complet,it stopped firing
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Jan 28, 2012, 01:25 PM
    . Remove the spark plugs and check each cylinder's compression.

    . Ensure you used the proper timing marks for your specific engine and correctly adjusted the timing belt's tension. Afterwards, did you torque the tensioner bolt to spec?

    . Did your Accord previously overheat? If so, did you machine the head and check for valve, piston, and connecting rod damage?

    . Does the Check Engine Light consistently come on for 2 seconds and then go out, when you turn the ignition switch to ON (Position II)?

    . During the 2 second interval, can you hear the fuel pump run?

    . Have you checked all under hood and under dash fuses with a test light or multimeter?

    . Have you checked for codes?

    . Have you checked for spark?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Engine not firing on a 1991 honda accord? [ 2 Answers ]

I was headed to the store when my honda accord started sputtering like it was out of gas so I put 2gallons in it and still would'nt start. Had it towed home where I found out it wasent getting fire. What to do?

Changing head gasket on a honda ht3813 water cooled engine . [ 0 Answers ]

Any help would be greatly appreciated! Thanks Fred

Changing head gasket on a honda ht3813 [ 1 Answers ]

Anyone ever change the headgasket on a ht 3813 ? Could use some helpful advice .

Changing an ignition switch in a 1991 honda accord [ 2 Answers ]

1991 honda accord will not stay running unless you keep slight pressure on the key. I was told the problem maybe the ignition switch. Estimate given for repair was 180.00. What should I DO?

I was told changing a head gasket on a honda was not hard. [ 1 Answers ]

How to change a head gasket on 95 civic lx. I`m not to good with tools, bad hands. {moved from Forum Help-<>}

View more questions Search