Ask Experts Questions for FREE Help !
Ask
    beedebee's Avatar
    beedebee Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 27, 2012, 10:33 AM
    Peerless purefire boiler
    We had a peerless purefire installed in the spring. Ever since the heat was put on we have enormous amounts of dust which seems to bother our breathing. Was it installed wrong by the plummer?
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Jan 27, 2012, 06:35 PM
    Your Peerless boiler heats an moves water through water lines. If they replaced a forced air system with a water coil at the time its possible you may have some air leaks on the return. If it was just the boiler replaced your dust may be due to a leaky house--(doors,windows,plumbing penetrations, electrical penetrations, and so on) it all adds up.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Peerless purefire boiler [ 11 Answers ]

Anyone have any experience with Peerless brand purefire boiler? I just purchased one to install in residential application. If anyone has used this brand,I'd appreciate the feedback. Peerless Boilers, Bally, PA, Heating, A/C, Water Heaters

Peerless boiler purefire problems? [ 0 Answers ]

How about a home owner question, Power Problems ? During the recent power outage in MA, I had to power up my portable generator. That's when I found out how temperamental this unit is. This was this time I had to run this furnace of off the generator ( 1 year old) and unless I had the right...

My peerless purefire boiler makes a load bang on ignition [ 0 Answers ]

My peerless purefire boiler makes a load bang on ignition... any ideas what the problem is on the very first ignition I don't have any bang but after that it gets pretty loud... check all the co levels and all is good

Peerless purefire problems [ 6 Answers ]

I just read your post about your peerless boilers. Unfortunately I am having problems after only one year. I have the Peerless Purefire 110 gas fire. The unit will not reach set point temp and continually goes through "trial for ignition" cycles. After pulling the side cover off I noticed all the...

Peerless Purefire [ 6 Answers ]

I have a Peerless Purefire boiler (80,000 BTU). The hoses (#1 in picture) that connect from the "combustion chamber" and "vent system", to the tank, leak. I have tried tightening the plastic clamps that come with the boiler, and even used metal hoes clamps, but nothing has worked. Is there a...

View more questions Search