Ask Experts Questions for FREE Help !
Ask
    kwant's Avatar
    kwant Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 25, 2012, 11:15 AM
    How to replace bath fan on switch that is run through a gcfi
    Hi I had an electrician install a bath fan over the shower. They put a GFCI next to the circuit box and gave me 2 switches in the bathroom. One continues to control lthe lights the other to the new fan. Fan burned out 11 years later and I started to replace it but the marings fell off my wires. So I have 2 blacks 2 whites and 2 grounds that I need to connect to the new fan, Not sure how to do it. Don't think it is the obvious because of the gfci. Helpmmy email lis : [email protected]
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Jan 25, 2012, 04:22 PM
    They put a GFCI next to the circuit box
    Does that mean they put a GFI outlet nest to the breaker panel?

    Does the light still work?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replace 5 wire ceiling fan switch [ 24 Answers ]

I about a harbor breeze 3 speed 5-8 wire fan switch (33906) to replace my 5 wire switch that broke. I having trouble figuring out the wiring. On the old switch it was wired as follows: L - Black 1 - Grey 2 - Brown 3 - Purple 4 - Orange The new switch only has numbers L - 3. However...

How to replace threespeed celling fan switch [ 1 Answers ]

My celling fan switc brok int small pieces am trying to replace it , it is a three speed switch with red blue and black wires the fan has 2red and 3 black wires am lost as to which wires connects

Replace Ceiling fan/light switch [ 1 Answers ]

I am trying to replace a ceiling fan/light switch. The switch I purchased is a Harbour Breeze universal switch. The wall has three wires. Two blacks and a red. The old switch has a black wire (connected to one black wire in the wall), a red wire (connected to the red wire in the wall) and a...

How do I replace the pull chain in a fan switch? [ 1 Answers ]

The pull chain was pulled out of a zing ear 208s switch on my shop fan. Can I reinstall the chain without replacing the switch? If so, how? If not, where can I find a new switch?

Light and bath fan on one switch [ 4 Answers ]

Hi, I need a little help. I want the bath fan and light to opperate on one switch. I ran the power to the light and have the fan connected at the light. Then I ran the switch to the light.my problem is when I turn the light on, the light is very dim and the fan is at half speed. What am I doing...


View more questions Search