 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trying to wire in a transformer and relay to an old holly gas heat a/c unit
The unit has is on the roof the blower motor (indoor fan)has two wires coming of the motor. Condenser fan or (outdoor fan) has two wires also. Compressor has three wires comon, start,run and has run cap. Then I have set of contacts L1,L2,T1,T2 along with two common prongs for L1,L2 and two prongs beside T1,T2. There is a limit switch with two prongs a time delay w/two prongs#2 and #4 on bottom, two prongs on top labeled H and H. I have a relay numberd 1,2,3,4 and 5 but no prong and last I have the transformer red and green 24v red and white 208v
Also the two wires coming of the gas valve. How do I wire all this together please help I am cold. |
||||
Check out some similar questions!
I am wiring a control transformer for a gas furnace. I labeled the wire but the
[ 0 Answers ]
Transformer blew after 5 min. The new transformer is universal. Pimary white common blk 120v.does blk go to fan and white go to limit switch? Secondary yellow vac blu 24V. Does blu go to red wire to thermostat and yellow go to relay and gas relay?
I need to wire a lennox g12 conservator unit, wires from thermostat to transformer
[ 1 Answers ]
The unit is a 1988 or 89 lennox g12 conservator unit and its wired incorectly I need to know how to wire from the tsat to the transformer. Also I don't see a circuit board.
My unit runs but no heat defrost relay keeps clicking
[ 0 Answers ]
My unit runs but no heat and the defrost relay keeps clicking what is my problem Thanks Jimmie
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
