 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Troubleshooting state select electric water heater?
My State Select Electric Water Heater Model # PR650XBPDTD; Serial #: F04423256... won't ignite. I replaced the Ignitor assembly and it continues to give me the same error code on the temp panel: far left green light and the A & B are yellow. Please Help!
|
||||
|
||||
|
Hi Annie
Those fancy lighted gas valves are very specific and are usually accompanied by an instruction manual on the side of the water heater... can you find your manual? If not, give the technical department over at State industries a call... they'll nail this down for you in seconds, OK? State Industries | Contact Information Let us know how you make out, OK? Mark |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Propane water heater modelPR650CCVIT no hot water exhaust fan is running .on the controler the vacation light is on the one in the middle is on and the one on the far right is on that says very hot. I go and push the two arrows to relight it and then the center light should blink and fire up but...
I have a State Select water heater. It is continually dripping water from the relief valve opening. Otherwise, it appears to be functioning normally. Can you tell me what the problem is?
I have a State Select electric water heater (M/N ES630DOLSG) that is not heating water. There is electricity (power) going to the unit. Is there a re-set button?
I have state select water heater and it went on vacation mode how to bring it back in regular mode?
We have a State Select instant water heater that is about 3 years old. It serves a single small sink in a room that is rarely used. Tonight it started to leak. I unplugged it, shut off the water at the isolation valve and opened the drain valve. Less than 1/2-cup of milky-looking water came...
View more questions Search
|
