 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Troubleshooting ge sunsmart timer 15312?
I am having a problem. My lights will not turn on, not even with the over ride switch. I have an older house that does not have ground wires. I guess my question would be do I need the ground for the timer to work? The display is lit up, it does run through the programing steps but no light. Thanks for any help in advance
|
||||
Check out some similar questions!
Thanks in advance to anyone kind enough to answer: in re: T101 --if the manual lever is in the "on" position, does that mean the automatic functions are over-ridden and therefore the T101 is "out of the loop" until that switch is changed to the "off" position? --can the T101 be functional (eg,...
I have a intermatic t103 timer I have a 30 amp breaker I have 10/2 romex from the breaker to the timer the timer says it is double pole single throw I want two 120 volt wired outlets from this timer it says it has a 120 volt clock it has one terminal that has the letter a on it and a white wire...
I have a maytag atlantis. The timer will not advance. The heat works.I replaced the timer still will not move.
I am trying to wire a digital time from one light switch to control two lamps outside my garage. There is another light switch right next to it that controls two lamps inside my garage. I tried to replace the switch this morning and could never get it to work. Attached is a picture of the wiring...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
