Ask Experts Questions for FREE Help !
Ask
    alexxus's Avatar
    alexxus Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 11, 2012, 06:18 AM
    Heatpump code 1 3 on
    I have a carrier heat pump it flashes 1 3 on the condenser and 26 on board at furnace. One saying problem is communication the other being high press switch what is causing this

Check out some similar questions!

Grandaire heatpump [ 1 Answers ]

Who actually makes this grandaire heat pump? Are they usually used in manufactured homes?

Wiring color code for Heil Heatpump NHP024AKC/EBP2400A2 thermostat [ 0 Answers ]

I have a faulty thermostat, but the wires got messed up now I am trying to determine which color goes to which terminal?

Goodman Heatpump [ 4 Answers ]

I have a goodman heatpump... I turned my breaker off by mistake and now the unit outside will not come on the air inside will run?

Which is betterAmana heatpump or American Standard heatpump [ 6 Answers ]

Hi I live in AL where the temps are 90+ degrees for 6 months or more and are looking at new heat pumps. We have had one company recommend an Amana 4 ton 2 stage heat pump for our 2200 sq ft house with vaulted ceilings and sklights. We are also looking at an American Standard because me Dad...

Heatpump not working [ 2 Answers ]

Hi, First,let me say that I am ignorant in this area. I have a older heat/air system and had new motor installed 2 yrs ago. (2nd time in 5 yrs) Always say the bearings are shot. Anyway, went to switch from heat to air again this year,and the same thing. Inside blower working, fan outside not...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.