Ask Experts Questions for FREE Help !
Ask
    lholguin81's Avatar
    lholguin81 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 2, 2012, 11:08 AM
    My a/c will not turn on , on auto but it will on fan on
    I change out the throm. Already but nothing happens on the new one I put the old mone on and it works but only on fan on it will work but on auto it will not

Check out some similar questions!

Thermostat Q - Blower Does Not Turn ON in FAN Auto Mode [ 10 Answers ]

I just installed a NOMA 7-day programmable thermostat for an electric furnace/AC system (ceiling unit). I believe the wiring (5-wire) is correct. When I set it to COOL with Fan set to AUTO, it turns on the A/C and the fan automatically. Good. But when I set it to HEAT with Fan set to AUTO,...

Auto turn signals [ 2 Answers ]

I wonder what the designation letters means in front/behind of the auto turn signal bulbs Auto Zone has two bulbs 1157ALL for $5.47 Napa has bulbs 1157AVB for 69 cents Each. Napa is a pretty cheap price.

When turn unit on fan won't turn and is hard to turn when unit is off fan will freewhe [ 1 Answers ]

When my ac unit comes on the blower motor won't turn and its like its stuck. But when power is off I can turn the fan easily. Is this the motor or capacitor

When my home ac turns on the outside compressor and fan turn on then turn off [ 1 Answers ]

When my ac clicks on the outside compressor and fan turn on then turns off. When it runs the air is cool

AC blower fan will not run in auto, only "ON". (heater runs in auto fine). [ 2 Answers ]

AC problem. My blower fan will not run in auto. (heater runs in auto fine). The fan will run in "on" position. I suspect the timer (or maybe a limit switch if there is one) on the fan control board. Does anyone know where I can get a schematic for the Lennox BCC2 fan control board? Thanks...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.