Ask Experts Questions for FREE Help !
Ask
    tchong's Avatar
    tchong Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 31, 2011, 10:25 AM
    The igniter gloomimg but no gas
    Hi, I have trane xr80 abut 9 year olds. Last night I notice the cold air keep blowing. When I check it out, I see the igniter keep glomimg but the valt dit not open gas, after I turn off and clean the sensor and put back, it work as normal. What is cause of it? The valt is going to die or sensor? Would any one help me out.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Dec 31, 2011, 11:54 AM
    The flame senser needed cleaning

    I don`t know what a valt is,, maube someone else can help you with this. I`ve been in the HVAC business for about 20 years ,but never heard of a Valt. Sorry
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #3

    Dec 31, 2011, 06:14 PM
    Im also stumped by valt. If you cleaned the flame senser, and all is working good, then I would just let it work until you have further problems. Hope it works for years to come. Take care.
    boyentoncubeta's Avatar
    boyentoncubeta Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Jan 5, 2012, 01:13 AM
    I don't know
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Igniter won't fire blower comes on and then gas but not igniter, status light on [ 0 Answers ]

Igniter will not glow in my gas dryer [ 1 Answers ]

I have a whirpool duet gas dryer that will not dry my cloth,the drum spins .I removed the bottom panel and put the power on did not see any glow or any thing else turn on .Can some one pin point the problem?

No gas no pilot constant igniter - why? [ 3 Answers ]

have a 1982 rooftop carrier bdp type forced air furnace. It has a honeywell s8610f-1008 control module. Spark igniter is constantly on. Suddenly furnace no longer fires up. No gas is coming through a honeywell vr8204A gas valve. Disconnected entire honeywell wheel type thermostat. Cooling fan & a/c...

Jennair Cooktop Gas Igniter [ 2 Answers ]

Hi Iwas wondering if anyone may be having or have had problems with the igniter on the 5 burner cook top. One of the igniters no longer seems to be working. I tried to clean it but it still doesn't work. Any suggestions?

View more questions Search