Ask Experts Questions for FREE Help !
Ask
    jsfocke's Avatar
    jsfocke Posts: 310, Reputation: 37
    Full Member
    		  
    #1

    Dec 27, 2011, 11:51 AM
    What size wire for auxiliary circuit panel?
    I am installing a second circuit breaker panel in my home. I will be supplying the service from a 100 amp breaker in my old box to the main breaker in the new box. What gauge wire do I need for this supply?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 27, 2011, 01:12 PM
    Is there a main breaker in the new box? If not, you need to determine what the total load on the new breaker box will be. Then you need to determine how big the main breaker will be in the new box. How many Amps will you need? Ever done this before?
    jsfocke's Avatar
    jsfocke Posts: 310, Reputation: 37
    Full Member
    		  
    #3

    Dec 27, 2011, 02:59 PM
    Yes, the new box has a 100 Amp main breaker in it. I will be fed from a 100 amp breaker inserted in the old box. I will keep all the 220 circuits and large draw items in the old box.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #4

    Dec 27, 2011, 03:42 PM
    You did not answer ma's question about what will be the new load.

    To make it more complicated, need to know the connected load of the existing service to be sure it can handle additional load.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wire size wire & circuit breaker do I need for a 15.8 range [ 2 Answers ]

What size circuit breaker & wire size do I need rfor a 15.8 raqnge ?

Sub Panel AMP Size and Supply Wire Size [ 1 Answers ]

I would like to install a sub panel in my garage I was told to run 6/3 Romex to supply the sub panel and have done so. The run is about 65 feet and I am now wondering after reading this site what is the max I can get for this size wire? I plan to supply a compressor (20 amp) and the garden...

Wire size for a sub-panel? [ 1 Answers ]

I have a 100 AMP main Service panel in my residence and plan on doing some kitchen remodeling. What size breaker would normally be used in a 100 AMP Panel to feed a sub-panel. Additionally, what size wire would feed the sub-panel from this breaker. I am think a 50 AMP breaker and # 8 wire to...

Wire Size and panel size [ 6 Answers ]

I have a separate small living quarters that is a single room that is about 180 feet away from the main panel. It is going to get another little bed room a small kitchen and a bathroom also maybe a washer. The main panel is a 100 amp meter socket combo. What should I upsize the main panel to? ...

Wire size for sub panel [ 1 Answers ]

Hi, :) We are converting a garage into a guest house, with permits, and I have a few questions on the electrical side. I have tried to search for my questions, but need more info. Plans are to place a 100 amp sub-panel 250 feet from main panel. Will # 2 in 2 inch conduit be enough, how much...

View more questions Search