Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bryant 383KAV Furnace - Code 14 - Not getting 120 volts to ignitor
[ 4 Answers ]
Still scratching my head on this one. Everything appears to be working fine on my furnace, except that the ignitor is not getting juice to glow orange/white, hence the gas is not igniting? I disconnected the ignitor harness from the control board, ran the test sequence again, and determined that I...
383KAV Bryant Furnace - Code 14 Not getting 120 volts to ignitor
[ 1 Answers ]
Still scratching my head on this one. Everything appears to be working fine on my furnace, except that the ignitor is not getting juice to glow orange/white, hence the gas is not igniting? I disconnected the ignitor harness from the control board, ran the test sequence again, and determined that I...
Bryant 383KAV error code 34
[ 1 Answers ]
After reading a couple of posts, I cleaned the flame sensor. When that didn't work, I bought a new one and installed it. I am still getting the same code. The burner lights for approximately 3-5 seconds, then cuts off. The thermostat is calling for heat. What am I missing?
Furnace error code?
[ 1 Answers ]
I have a Bryant 376CAV furnace. The LED light is flashing "short - long - long." There is no sticker posted explaining what this sequence means. Help.:confused: View more questions Search
|