Ask Experts Questions for FREE Help !
Ask
    arctichigh's Avatar
    arctichigh Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 17, 2011, 12:00 PM
    Intertherm Furnace Problems?
    I have an intertherm MMHA070AAHR-05 FURNACE the blower kicks in cycles does not light then shuts down. Any answers

Check out some similar questions!

Intertherm furnace codes? This furnace flashes the yellow light 6 times [ 0 Answers ]

Furnace will run for 30 seconds. It shuts down and the yellow light will flash 6 times and the does the same thing over and over. Red light stays steady. Thanks for the help.

Intertherm Furnace Problems [ 0 Answers ]

I have a model E2EB-012HA. I replaced both sequencers, transformers, fan relay, and thermostat, and it still will not run. You can touch red and white wire and sometimes it will come on directly. Any answers??

Intertherm furnace problems [ 0 Answers ]

My intertherm furnace id tripping the breaker, any sugguestions?

Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks [ 3 Answers ]

I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.

Intertherm furnace pressure switch open problems [ 1 Answers ]

We have an intertherm furnace. The led light is blinking twice meaning that the pressure switch is open. We have replaced the pressure switch and are able to blow air through the attached tubes. They seem clear. The light continues to keep blinking.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.