 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whirlpool Gold Catalyst Washer delayed start
I think the unit has a problem in the electrical panel. It seems not to start at all--no beeps or lights whatsoever. Then it starts up about 5 or 10 minutes later as normal. On one load yesterday, a bunch of beeps were sounding for about the first 5 minutes after it started (and different lights were going on and off). Every few loads, I have no problem at all. This just started about a week ago. The unit is about 6 years old, and I've never had a problem until now. Any ideas? Thank you!
|
||||
Check out some similar questions!
Whirlpool gold 3 speed catalyst washer
[ 0 Answers ]
I have a whirlpool gold 3 speed electronic catalyst washer. It fills a little then I get an F4 error. Followed instructions on resetting, still getting error. What's the problem... can't find what F4 error is?!
Whirlpool gold catalyst washer 8280928
[ 0 Answers ]
Fills with water,goes to spin cycle but does not agitate.
Whirlpool gold catalyst washer gsx9885jqo
[ 3 Answers ]
My whirlpool gold catalyst washer gsx9885jqo won't spin but it does everything else
Whirlpool gold catalyst washer won't drain
[ 1 Answers ]
My washer will fill and agitate but when it should drain it just recycles the water back into the tub. Originally we had an error code "LD" and took the whole thing apart to find a sock in the pump. Now that I have put it back together, it won't drain just recycles.
Whirlpool Gold Catalyst Washer
[ 3 Answers ]
This was our FIRST Whirlpool washer/dryer set and our LAST!! How does one remove the control panel?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
