Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Proper 4-wire wiring for Honeywell RTH230B
[ 4 Answers ]
I just replaced an old mercury stat with this programmable Honeywell RTH230B. I have a 4 wire cable that was coming in to the mercury stat with the following colors: Red, Blue, White, Green I have it wired up as best I could. The heat works fine. When I try to turn the AC on, the fan turns...
Wiring for Honeywell RTH7600D, old system was Honeywell T841A1217
[ 2 Answers ]
I'd be most grateful for some assistance in wiring a new Honeywell RTH7600D to a heat pump system that has AC as well as Aux and Emergency heat (which I guess makes it a multi-stage system?). My old system was a Honeywell 841A1217, which had the following wires; I wired them to the new system as...
Installed honeywell L8148E Relay - Copper Coils Burnt.
[ 1 Answers ]
Just had a L8148 installed- Plumber left and 10 minutes later I noticed scent- Took the face plate off- noticed the coils all fried- He is returning this evening- Just curious as to likely issues. Thank you.
Wiring old taco zone valves 555-102 to furnace
[ 1 Answers ]
Help! I have a two zone system of water base boards hooked up to an oil furnace (or is it a boiler?). I had it serviced a month ago and I just realized that the wiring on the two zones, which are controlled by taco 555-102 zone valves, was reversed so that the wrong thermostat controlled the wrong...
Replacing Honeywell T8411R with Honeywell RTH7500 - wiring problems
[ 1 Answers ]
I need help getting my new, programmable thermostat to work. I currently have a dual-stage Heat Pump and A/C unit that works fine. The current thermostat is the Honeywell T8411R. I don't know the number for the subbase, but it's the one that came with the thermostat. The current (operational)... View more questions Search
|