 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman GMP075-3 Rev. A Bad Burner Flow?
My 1993 Goodman GMP075-3 Rev.A Furnace has 3 burners. The first 2 burners closest to igniter light just fine but the last burner (flame sensor location) is making a loud Whoa Whoa Whoa noise when trying to ignite than it finally ignites fully and runs fine. All 3 flames have a pretty good blue flow with a minimum of orange tint at the end of flame, which may be normal? Could this be the burner tip being dirty or clogged? If so, how do I remove the burner and tip and how do I clean the tip, which screws into the black gas pipe? The burner itself seems clean.
Thanks! Kev |
||||
Check out some similar questions!
I am having a problem adjusting flame on 2 of the 3 burners it will not adjust to a tight cone and the excess flame keeps triping heat censers I took apart and wire brushed everything inside burners can they go bad they are 17 years old.
Goodman GMP075-3 furnace won't fire up the burners. Replaced the flame sensor, validated all fans are working correctly, checked HSI igniter, cycles with the rest of the system and get's 'yellow/orange' hot, system shuts down after 3 failed cycles to light. Resistance on the igniter when cold for...
I have a gas furnace Goodman serial GMP075-3. The fan keep running and never stop even after the termostat is set to off. Do you know what could be the problem?
What ton is the GMP 075-3 REV B gas heating unit?
I tried firing up my furnace today for the first time this year, and it will not ignite. When the furnace is turned on the blower motor starts, the igniter lights up, I can hear a relay click (assuming the gas valve relay) the funace does not ignite a flame, I do not smell gas, the gas valve is on,...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
