Ask Experts Questions for FREE Help !
Ask
    bj1951's Avatar
    bj1951 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 12, 2011, 05:17 PM
    Whirlpool 940 series?
    I have the Whirlpool 940 series dishwasher an when I closed it an pushed the start cycle I heard a small click then nothing. It would not
    Start even though lights were on as usual. Can you diagnose problem?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Dec 13, 2011, 07:05 AM
    You will have to check it out with a meter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Imperial Series Washing machine [ 1 Answers ]

I have a Whirlpool Imperial Series Heavy duty Large cap washing machine. Model #LLT8244DQ0, Serial#CE3602581, I need to change the belt. I see where it goes but not sure how to get a new one on there. I found one thing that says I have to take off the pump or motor and I see that. I need tools to...

Whirlpool quiet wash plus 940 series use and care guide [ 0 Answers ]

Suddenly dishwasher whirlpool quietwash 940 will not start... pbreakers OK, worked fine a couple of days ago... is there a re-set button?

Whirlpool Mark II Series won't spin [ 3 Answers ]

I just got this; used and there seems to be a lot of rust under here and there. I was told works fine, a repairman just fixed something or other {owner passed away}. Anyway fidgeting around with it I have discovered if I hold hinge button in the machine will spin air but nothing heavier. ...

Whirlpool Quiet Wash Plus 940 series won't turn on [ 0 Answers ]

Hi, I tried to start my dishwasher tonight. I closed the door pressed the button I normally push and the right lights came on and I heard a click and then nothing. The lights all work normally but it won't do anything else. When I push the drain button it doesn't do anything either. Could the...

Whirlpool Series 80 Dryer - Troubleshoot Assistance [ 1 Answers ]

Greetings, and thank you for your web site. I have a 7 year old Kenmore Series 80 Dryer. On any fabric setting of the dryer, the dryer stops after running 10-20 minutes (It runs longer depending up the temperature setting, at "High", it could stop earlier. I wait a few minutes, start the...

View more questions Search