Ask Experts Questions for FREE Help !
Ask
    Connick's Avatar
    Connick Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 11, 2011, 08:09 PM
    Fan removal
    Need to remove housing to replace remote receiver
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 11, 2011, 08:14 PM
    Many different fans and different ways. What fan? Picture would help.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    Dec 11, 2011, 08:19 PM
    Many receivers are in the ceiling canopy. Some are in the motor housing.

    If it's in the housing your guess is as good as ours since we can't see what fan you have.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Removal of old celing fan [ 2 Answers ]

I have removed the light kit, fan blades, four screws which hold motor together, the fan motor still will not come down. What I need is a visual instruction to disassemble this flush mount celing fan.

Hunter Fan Receiver Removal [ 1 Answers ]

Hunter sent me a replacement receiver - but I can't seem to figure out how to remove the old one from the ceiling fan. Any help?

Removal of ceiling fan [ 20 Answers ]

I have checked a lot of sites on how to remove the ceiling fan. I have also followed a number of give instructions. I did all the need steps and have reached a dead end the ceiling fan won't come off. I am attaching images of where I have reached, any help would be great, before I break it off....

Removal of ceiling fan [ 2 Answers ]

How do I remove a ceiling fan? Thanks... Bill D

Ceiling fan removal [ 2 Answers ]

I have a Hampton Bay Ceiling fan I'm trying to remove from the ceiling. I have removed the lights and exposed the basket with the pull chain switches, I have disconnected all of it. Their was a 7/8th nut holding it underneath in the center. I removed that and every other nut and screw in site. I...

View more questions Search