Ask Experts Questions for FREE Help !
Ask
    auelliott's Avatar
    auelliott Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 11, 2011, 07:59 PM
    Heating Problems
    I am having problems with the heating in my house. I have a Honeywell thermostat, and it will just shut off and not turn back on. It can get down to 40 degrees in the night, when I wake up I will mess with the thermostat and the heater will come back on. It will not hold the temperature. The temp will get up to what I have put it at and then shut off and not turn back on unless I mess with the thermostat. I have replaced the batteries, flipped the breaker, and nothing will make it hold the proper temperature. Any suggestions on what I should do? Any help would be great.
    Sincerely,
    Cold and annoyed
    rodri's Avatar
    rodri Posts: 48, Reputation: 8
    Junior Member
    		  
    #2

    Dec 11, 2011, 09:25 PM
    It sounds to me That the Tstat needs to be replaced!
    auelliott's Avatar
    auelliott Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 13, 2011, 05:57 PM
    Got a new thermostat and all is working wonderfully Thanks for the answer :D
    rodri's Avatar
    rodri Posts: 48, Reputation: 8
    Junior Member
    		  
    #4

    Dec 15, 2011, 09:08 AM
    Any time
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heating problems [ 1 Answers ]

I replace my water pump and thermostat on 2001 dodge truck and there is no heat

Heating problems [ 2 Answers ]

OK I have a 2001 carrier 58rav downflow furnace. The wheel on it was making noise for about a week or so and now it is flashing code 31 I try to reset it by turning off the power turning the thermo stat down wait 20 min and then turn everything back on. Then it makes a wineing noise and then does...

Heating problems [ 2 Answers ]

I am having trouble with my heater. It kicks on, the burners are lit and the motor is on, but no air comes out the vents. Why is that?

Heating problems [ 2 Answers ]

I have a very old GE gas furnace model # BLU080E924B1 that doesn't want to work on auto. Thermostat seems fine, but unit won't run unless I connect gas valve and blower directly. I installed a new relay, new fan/limit control and new transformer. I don't understand why it doesn't work on auto.

View more questions Search