Ask Experts Questions for FREE Help !
Ask
    jrmjrco2's Avatar
    jrmjrco2 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 11, 2011, 07:35 AM
    What size circuit breaker a furnace had
    What size circuit breaker a furnace had?
    jrmjrco2's Avatar
    jrmjrco2 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Dec 11, 2011, 07:44 AM
    Electrical furnace
    I had two double pole 60amp breaker mount on electrical furnace is that mean that is 240volts ?
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #3

    Dec 11, 2011, 08:46 AM
    Okay, please do not make duplicated postings. The fact that you know the breaker size in this post, answers the question in the second post.

    By the way, good morning.

    Most if not all electrical furnaces operate at 240V.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do we size HVAC circuit breaker [ 0 Answers ]

Q:We have to purchase an A/C package unit, approx. 22 tons. The spec given is: total running amps 124 A, at 230v 3 phase 60 Hz, 80kw rated. We have to find the circuit breaker rating and the conductor size?

What size circuit breaker? [ 2 Answers ]

Finally installing electric garage heater that I have been asking questions about recently. Instructions say that heater draws 31.9 amps and that 6 gauge wire is required. That's all fine, however, my question is what size 2 pole breaker should I use, 50 or 60 amp? If it is any help, it is a 7.5...

Circuit Breaker Size [ 6 Answers ]

I have a 48A 240VAC instantaneous water heater. What size circuit breaker do I need? I am thinking a 50A would do because it is not continuous.

What circuit breaker size should I use? [ 12 Answers ]

I recent purchased a heater that is rated 42.2 amps @ 240 volts. I was told by a licensed electrician that 8 awg would be fine for the heater. I have read some forums and now am questioning that also. I am wiring it in @ 220v So my questions are. Will it pull more amps @ 220v and if so how much?...

View more questions Search