 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane xr80 weak blower
I recently purchased a home that is equipped with a Trane XR80. When we first started running the heat, the blower was very strong. It's been about a month or two. All of a sudden, the other day, the force of the air seemed about 60-70% weaker than what we were used to. There is only one large register and the only return is in the basement at the bottom of the unit.
Any advice would be helpful. This is my first winter as a home owner and my first experience with a forced air furnace. Thank you in advance for any advice. |
||||
Check out some similar questions!
I have a Trane XR80. The gas comes on fine but the blower motor struggles to run. It starts a bit then quits. Other times it will run fine for a few minutes then starts to making a humming noise and then shuts down. The light blinks 4 times - Open Temperature Limit Circuit. Any ideas? It is...
I have a Trane xr80 that's about 5 yrs. Old. Everything starts (pr-fan-burner-ect.) but the blower never kicks on. I need help troubleshooting the blower circuits.
Trane xr80 is blowing cold air. When first turned on, it flashed a red light once and then the light goes off.
Sorry in my last question I forgot to list the model of trane I have. Its Trane XR80 and the furnace cuts on and off a few seconds apart. The red light blinks 2 times. Any suggestions? Cold air here
My Trane XR80 furnace is only blowing cold air. The diagnostic light is bllinking 6 times which, I think, means the 115 volt polarity is reversed. Is this something I can fix or do I need a repairman?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
