Ask Experts Questions for FREE Help !
Ask
    newmacman's Avatar
    newmacman Posts: 2, Reputation: 1
    New Member
     
    #1

    Dec 7, 2011, 04:30 PM
    Newmac draft fan and thermostat trouble.
    I have installed a new draft fan and thermostat on my furnace but when I turn up the thermostat to cut in the draft fan nothing happens. Everything else still works fine. I have tried another relay but still nothing. I have tested the wires and it seems to me that the power goes into the transformer but does not come out. How can I get my furnace fixed?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #2

    Dec 7, 2011, 06:02 PM
    If you have 120 volt into transformer, but no 24v out of trans, you need a new transformer, or possibly a new fuse on the low voltage side of trans.
    newmacman's Avatar
    newmacman Posts: 2, Reputation: 1
    New Member
     
    #3

    Dec 7, 2011, 06:52 PM
    Thank you very much for your help mygirlsdad77.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #4

    Dec 8, 2011, 04:29 PM
    No problem. Was it a bad transformer?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Induce draft fan motor [ 0 Answers ]

My idm comes on and off every once in a while

Trouble shooting GMP Furnace draft blower motor slow starting [ 2 Answers ]

My exhaust draft fan has started giving me problems. The fan doesn't always come on and the furnace won't run. Sometimes the fan tries to turn but just barely and is real warm to the touch. When I can get it to spin it seems to be OK. I'm wondering if it is the capacitor or the motor? Any help...

Looking for a draft inducer fan #621080 Anybody? [ 2 Answers ]

I'm looking for a draft inducing fan, part #621080. Any help would be great [email protected]

Draft fan runs always [ 1 Answers ]

Induce draft fan is on all the time, What can I check so that it will operate the right way?:p


View more questions Search