 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Haier Furnace Cuts Out After Flame Lit for About 5 Seconds
Haier HG93A0803 furnace starts combustion fan, igniter lights, flame starts, then stops after about 4 or 5 seconds. I replaced flame sensor and it seemed to work, so I left house (mother's seasonal vacant home). Next day same problem, so removed flame sensor and cleaned w/steel wool, reinstalled and it lit and stayed on a couple minutes, so I left again. Today, same original problem. Any suggestions?
|
||||
Check out some similar questions!
I have a York Stellar Furnace The Model Number is ( P3UCd20N09101A) I can not get the flame to stay on, Therefore I am heating my house with the oven . I have cleaned the Temperature control stick, Gas is on, Thermostat is digital and has new batteries, and the filter is brand new. I have...
Have natural gas hot air furnace with honeywell smart valve SV9520H8067. Unit calls for heat and ignites OK but only stays lit for 5 seconds and goes out. Have had smart valve replaced 5 years ago. Does this sound like another smart valve problem?
I have a Bryant Plus 80 model 395C that is 17 years old. I turned the furnace on this weekend and it starts up just fine. The draft blower starts, the igniter glows, the valve opens and it lights the burners. After it heats up the blower comes on as always. After about 3-5 minutes the burner goes...
Having problems keeping flame burning in furnace.Oil furace hadn't been used in 2 years and had oil delivered recently.We figured the tank would be close to empty but were told after it was filled that it was already over 1/3 full. Furnace would light up with yellow flame but then turn blue and...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
