Ask Experts Questions for FREE Help !
Ask
    shooterbob's Avatar
    shooterbob Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 7, 2011, 11:56 AM
    Open pressure switch/york
    Got 3 red light code changed out pressure switch, still I get three red light

Check out some similar questions!

York diamond 80 pressure switch [ 4 Answers ]

My York diamond 80 furnace does not start. Its message lights 3 times , so according to the table is the pressure switch. I can not find a diagram of the furnace. Where the switch is located?

Error code for "open pressure switch" on York natural gas furnace [ 6 Answers ]

I get three red flashes from the furnace after an attempt sequence when the t-stat calls for heat. The motor starts, and seems to try to light but after about thirty seconds, it quits and gives the error code. I have removed both gray tubes from the pressure switch and made sure they are...

York residential furnace pressure switch problem code stuck switch [ 1 Answers ]

I have a york furnace P2MD12H06401A after 1 hour it shuts down and gives a 2 flash error for a stuck pressure switch. The switch is new can it be wired wrong? The old one had 2 white wires piggy back and 1 blue wire. The new switch has 3 separate terminals

York furnace pressure switch stuck open [ 0 Answers ]

I have a york gas furnace. Condensation is leaking out of the exhaust motor. I removed the motor and everything seemed to be fine but when I put it back in and try to start the furnace, the red light flashes 3 times indicating pressure switch stuck open. What do I do now? I'm lost.

York Heater - Pressure Switch Stuck Open [ 4 Answers ]

I have a York heater that won't heat our second floor. The indicator LED light flashes three times which means the Pressure Switch is Stuck Open. Is there a way I can fix this myself? If so, how? Thanks in advance for any help. John

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.