Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bryant 394dac Fan switch to On doesn't work, Auto works fine
[ 0 Answers ]
Hooked up an older but hardly used Bryant 394dac 00080. Used a new Honeywell programmable thermostat but fan doesn't run when switched to ON. Is the color coding different or do I need a jumper? Should the fan switch to ON without AC or a cooling fan relay? Was this an option in all models? Thanks
Remote control on ceiling fan works for lights but doesn't work on fan on/off, speed
[ 3 Answers ]
Just installed a hampton bay ceiling fan with remote control.. the remote control works on the lights to turn them on and off but will not turn on/off fan or contol speed. What's wrong.
I wired a fan light combo and the lights work fine but the fan trips the breaker?
[ 5 Answers ]
I wired a fan light combo with a nightlight.the lights both work fineand the fan trips the breaker as soon as switched. The wiring is correct according to the fan wiring diagram and the switch diagram. If the problem is in the fan wiring how would I diagnose or fix it?
Two of four lights work on the hampton fan I installed. Fan works fine.
[ 2 Answers ]
Hampton Bay Carriage House fan problem
FAN doesn't work when it's 'Auto', but works fine at 'On' in my central air/furnace
[ 1 Answers ]
undefinedFAN 'On' or 'Auto'FAN 'On' or 'Auto' Hi, I have programmable thermostat connecting air condition / furnace system. Now if I turn system to 'Cool' and Fan at 'Auto', no cool air come out (compressor works, you can hear the noise). If I set FAN to 'On', life is getting better. But the FAN... View more questions Search
|