I pulled the light assy down and did see the blue and black coming from the chain switch. I did a ohms test and the switch is fine.
Any other suggestions?
![]() |
I pulled the light assy down and did see the blue and black coming from the chain switch. I did a ohms test and the switch is fine.
Any other suggestions?
Swict is fine but is it getting power to the feed side/incoming? Is this controlled only by pull chains or is there a remote and/or wall switch?
There is a wall switch as well and its on. I am going to check and make sure I have continuity through the switch as well... I thought about that the other day too!
All times are GMT -7. The time now is 07:37 AM. |