Ask Experts Questions for FREE Help !
Ask
    jimpenn's Avatar
    jimpenn Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 3, 2011, 09:55 AM
    Lennox gas furnace
    GHR 26 gas furnace will not light. The ignition sequence seems normal. The purge blower runs, the ignigtor glows and there is power at the gas valve but it will not energize the solenoid valves.

Check out some similar questions!

Have a new Lennox gas furnace SLP98UH [ 0 Answers ]

Have a new Lennox gas furnace SLP98UH... what should the temperature of the exhaust gases be at the point where they exit the house?. System has a Honeywell Visionpro TH8000 series thermostat... when the Fan is set to ON to run continuously, the blower speed is very low... how can the blower...

Lennox Pulse Gas Furnace? [ 5 Answers ]

I am having a diagnostic "nightmare"... only due to lack of knowledge of the Lennox Pulse. This is a roughly '90 model. 80,000 BTU... The problem: Furnace lights for about 10 sec- 2 minutes... shuts down... It resembles a primary air problem, sounds of the fire sucking air. A previous tech just...

Lennox elite series gas furnace [ 0 Answers ]

I set the thermostat at 70 degrees,the house is currently 63 degrees... the heater comes on, I see the flame and hear the blower,but it will only work for 2 minutes at a time.I cahnged the battries in theHoneywell electric thermostat but there was no change. Is there a way to troubleshoot(other...

Lennox furnace voltage to gas valve [ 14 Answers ]

I have a Lennox G20Q3E-75-1 furnace. The ignitor lights the pilot light but not the burner. The ignitor never shuts off. The fan blower will come on after about a minute or so but the burner never lignts. Any ideas??

Lennox Pulse Gas Furnace [ 1 Answers ]

Could you Please guide me to a source to obtain the Schematic Diagram of Lennox G14 or G21 Pulse Gas Furnace? I could not find the company web site!


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.