 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Floor drain ball valve.
Have a floor drain with floating ball valve. Water softener drains on top of the ball and when ball sticks water goes out on the floor. Lately the ball has stuck in the down position and it lets water rise out of the drain. What is the problem and the answer?
|
||||
|
||||
|
In would replace the ball with a Flood Guard.(see image) check them out at; PlumbingSupply.com - Flood Guards For Floor Drains - check valves to prevent flooding Good luck, Tom
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
This is the only full flow 1" ball valve I could find at the local Home Depot or Lowes. My intended use is on an extension to a 1" black pipe indoors and the red label on the valve says it's good for LP gas. As usual this time of year, no one could answer my question. I'd rather not go w/o a...
I know sweat soldering a ball valve is best, but will a "push-ft" compression "Viperlok" brand ball valve work?---My pipes are old copper, and have a few minor scratches and pits---I also noticed a seam running down one side of pipe. This water line runs out into garden, but valve is in the house....
Can I solder outlet side of a ball valve if the valve is closed and under pressure?
My plumber told me my water pressure is too high and is ruining my fixtures. Apparently my house is old and does not have these. Is installing these valves something I can do myself? The plumber wants to charge me $500.00. If so, where can I get directions? Help.
View more questions Search
|
