 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Craftsman riding mower (model 502.255040 ) jumps forward
My Craftsman riding mower (model 502.255040 ) jumps forward when brake\clutch is released. It will actually do a wheelie. I just got it from a friend so I don't have much history on it. It seems to run fine after the initial jump forward \ wheelie. No matter how slow I let the clutch out it still jumps. I tried adjusting the brake and clutch - which didn't help (but I'm not sure I'm adjusting them right). Any suggestions?
|
||||
Check out some similar questions!
I have an older Craftsman riding mower. The id decal under the seat is unreadable. Is there a mdeal plate or something sonewhere that I just haven't found.
The gear shift works very hard, particularly since I adjusted the brake. Does the brake adjustment effect the gear shift? If so, is it as simple as readjusting the brake? If not, how do I get the gear shift to move more freely? Thanks!
My 1999 craftsman Model 502.270110 won't start. Engine turns over and battery is charged. I replaced the plug and gapped it @ 0.030 (manufacturer spec), cleaned (not disassembled) the carburetor with Gumout but it still won't start. I've tried starter flluid as well but no luck. When I hold the...
This is the sillies thing. I had a flat back tire and took off the tire and had it fixed. I put the tire back on and then started the riding mower and it would not go into forward or reverse. I started looking through my owners manual for possible solutions and I tried to purge the transmission...
I have a craftsman lt1000 riding mower, I have no belt diagram, and belt is loose blades want turn, Does anybody know how to adjust belt, My grass is getting high thanks
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
