Ask Experts Questions for FREE Help !
Ask
    thepharce's Avatar
    thepharce Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 27, 2011, 05:16 PM
    Troubleshooting goodman manufacturing furnace?
    I have a Goodman GMP furnace which now will not come on. When I unplug the unit and plug it back in, it tries to start for a split second and then just quietly hums. Any thoughts?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Nov 27, 2011, 11:49 PM
    It sounds like the motor is seized up but you cannot know until you open it up and use a meter to find out what the problem is. You have to use a meter to check out a furnace; guessing does no good. DrTom4444
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace troubleshooting [ 7 Answers ]

My goodman furnace/ heat pump will not turn on when I turn on at AC the unit outside will turn on but the blower will not. There trouble shooting light is not on.

Goodman furnace troubleshooting [ 3 Answers ]

Goodman 95% 2 stage furnace. LED code says pressure switch is stuck open. 1) Changed switch. 2) Jumped Limit switch. 3) Changed PCB. Same error code. 3 blinks "code says pressure switch is stuck open" Can You Guide me further

Goodman furnace troubleshooting [ 7 Answers ]

I put a new board in a GMP070 and the inducing fan motor kicks as normal, then the HSI starts to light but the whole board goes dead within 3 seconds.

Troubleshooting goodman furnace [ 1 Answers ]

The flame sensor keep burning out and only run for a couple of minute . Maybe the condensation trap is fully of dirt

Goodman furnace troubleshooting [ 2 Answers ]

I went away for a couple of days and returned to a cold house. I have a Goodman Model HCC075ND4R that has Electronic Ignition with Relay + VR80204 - S8600H Control. I can not get it to fully ignite. It tries to ignite over and over again. I see a single blue flame for a short time, but not main...

View more questions Search