 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hi I have a Ruud Zephyr
I have a Rudd Zephyr EGPJ-07EAUER The problem is that when you set the temp the blower will kick on but there is no gas nor will ignite. It will not light at all. Could something need cleaned or adjusted and if so how do I go about doing it. I am somewhat mechanically inclined. Just need some advise and direction. I can't afford to call a Tech. Thanks!
|
||||
Check out some similar questions!
I have a zephyr typhoon ak2100 exhaust fan and one day the lights and fan just stopped working. I thought the power went out, but everything else in my kitchen is working except for the exhaust fan. My brother even tried to take it apart, but we're not sure what needs to be looked at. Please...
Hello, I have a Ruud Zephyr furnace and it keeps turning off after only about 2 minutes of running. I replaced all of the filters and cleaned the flame sensor. The furnace runs OK for 2 minutes, then clicking begins on the board somewhere and the furnace shuts off. Can someone help me?
Not cycleing properly
Is the Ruud Deluxe 90 still available for purchase
I want to replace my 3 TON AC unit, I have got two option Goodman or RUUD which is better. In terms of reliability and over all performance. I live in Texas near Houston. What is approximate cost of replacing evaporation coil and condenser unit ? Ball park figure is fine. I am getting quote from...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
