 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
The furnace starts up, ignights runs a little just before the blower would start, it resets it's self and starts over the process. I counted 6 light blinks and that's all it does, over and over... What is wrong? Please help! Thanks
Concord 80-Plus Furnace that stop working error 2 blinks Pressure switch closed with Inducer off
Concord90Plus Home Furnace Approx. 7 years old. Problem: For past 2 years during winter, temp sometimes drops below thermostat set point. In this mode, furnace compressor blower comes on, runs cycle, shuts off, but burners do not come on. After multiple cycles like this, eventually the...
My furnace has been working on and off for about 5 months... first it would go out completely.. and I found the wiring was loose.. then it worked for a few weeks.. now it doesn't work at all.. when I reset it the first time the LED lashed 3 times for the pressure switch... and I reset it again now...
Hi, glad to find some help, I found your site by accident,or my good fortune! I have a concord 80 , the thermostat clicks and the blower comes on but the furnace does not light,all help appreciated
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
