Ask Experts Questions for FREE Help !
Ask
    pullmannite's Avatar
    pullmannite Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 24, 2011, 05:19 AM
    Troubleshooting a Intertherm Furnace Model mmhb-090abhr-06?
    HI, When I turn it on , I get two flashes on red light. Will not start up. Thank you.
    glass61's Avatar
    glass61 Posts: 11, Reputation: 2
    New Member
     
    #2

    Nov 26, 2011, 08:04 AM
    The two flashing red lights indicates the problem area. You should be able to find the code for those flashes on the inside of your unit's panel. Also it is a good idea to look up the starting sequence of a heating unit which will give you a broad understanding of what should happen when the unit receives a call for heat from the thermostat.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Intertherm furnace troubleshooting [ 11 Answers ]

Having problems with our intertherm lp furnace. It runs for a while and then it kicks out the high limit reset on the purge blower fan. Then we shut the furnace off and reset the high limit switch button on, and it comes on again. We currently have the thermostat set at 67, if we increase the...

Intertherm furnace troubleshooting? [ 0 Answers ]

I have an intertherm gas furnace.. For some reason the heat portion won't kick on when turned on all gas connections and switches are on that need to be... When I bought the mobile home the original owners said that the heater worked... Any ideas why the pilot light won't kick on its fairly brand...

Need help with a intertherm gas furnace mmhb-070abhr-06 [ 0 Answers ]

Red light on the black box flashes 2 times and it says that it is not receiving signal from the central fusical switch not opening up in time

Intertherm furnace troubleshooting [ 2 Answers ]

My intertherm #e2eb-01sha electric furnace mostly just blows cold air. Sometimes however the heat works just fine. Also, anytime the blower is not running the furnace is hot so we have to turn off the safety disconnect. We have tried replacing the thermostat to no avail. Help please Michael

Intertherm mmhb 056 electric ignition furnace [ 5 Answers ]

Getting flashing light two times-indicates that control ion lockout due to signal not received by control that inducer pressure switch not closed n time, please help! p.s recently replaced ignightor and thermostat


View more questions Search