 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I am putting in a ceiling fan and wall switch. I have power (black, white, groung) to ceiling box. Running wire to a wall box is not a problem. I would like a wiring diagram to wire this properly.
Took old fan down put new one up wired it the same way,and when power is turned back on the lights and fan work but when you try to turn them off with the switch they won't go off.
I have put a new 3-speed, 4-wire pullchain switch in two of my Hunter ceiling fans. I am 95% sure I reattached the wires to the correct numbered positions -- black on L, green on 3, etc. The fastest speed works fine on both, but the other two speeds are the same on both -- the slowest speed. Would...
I've had no luck with getting the wall remote on my Hampton Bay ceiling fan to work. I was able to get the fan to work with the wall switch, but once I change out the switch with the wall remote it doesn't work. The l.e.d. on the wall remote is not even lighting. There are 6 switches on the...
Good morning all, I recently installed a ceiling fan in my Son's bedroom. I thought everything was installed correctly however when I go to the wall switch only 1 of the switches appears to be connected. So both the fan and light are controlled by 1 switch. I would rather have both switches...
View more questions Search
|
