Ask Experts Questions for FREE Help !
Ask
    Brrrrrrr2100's Avatar
    Brrrrrrr2100 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 21, 2011, 12:52 PM
    Trane furnace blinks red four times
    3 days ago I noticed cold are coming through the vents when the heater kicked on. I went down and Cleaned the inside and the filters. It worked for a little bit and then went back to blowing cold. The red light is blinking 4 times... open limit device. When I noticed it not working I have had it off It says open limit device. I have had it turned off for a night and day now. What do I need to replace and where are these reset buttons people are talking about?
    Brrrrrrr2100's Avatar
    Brrrrrrr2100 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Nov 21, 2011, 12:58 PM
    I forgot to say it is a Trane XR80
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane furnace blinks 3 times [ 0 Answers ]

Hi, my trane xr90 blinks 3times. I turn shut off the power and turn it on again and still it doesn't work. Can anybody help me it will be -22c tonight. Thanks

Red light blinks 4 times [ 0 Answers ]

Blower turns on but no heat. No flame. Gas is on. Red light flashes 4 times

Trane furnace xr80 troubleshooting red blinks [ 4 Answers ]

Tranexr80 lights flash 5 times...

York furnace red LED blinks 4 times [ 0 Answers ]

York furnace will light, but blower never turns on and red LED on main board blinks 4 times. Is there an easy fix?

Trane XB LED blinks 5 times and blower won't stop running, but no heat. [ 8 Answers ]

Problem: Trane XB LED blinks 5 times and blower won't stop running, but no heat. Any ideas what the solution is? I am thinking some kind of fan control board. I can shut off power to the whole unit, but when I power back on I get the same problem. Blower runs with no heat. The thermostat can be...

View more questions Search