Ask Experts Questions for FREE Help !
Ask
    cs1975's Avatar
    cs1975 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 15, 2011, 11:21 AM
    Bryant thermostat hc displays on power up?
    I just installed a Bryant non-programmable thermostat, upon power up, the display keeps blinking "HC", I've tried holding certain buttons together as instructed and nothing is working. What could be the problem?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Nov 20, 2011, 10:10 AM
    You need to get the model number of the stat and get the manual on it. DrTom4444
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant Evolution Thermostat [ 1 Answers ]

We have a Bryant Evolution system. Its only about a year and a half old. Was installed by the homebuilder. About 2 days ago it I noticed the reading on it said "cooling at 42" and we can not manually change the temp. to cool back up to 73 degrees. The up button for the temp. will not work to...

How is a transformer connected to get power and then give power to the thermostat [ 2 Answers ]

This is about hvac units: how is a transformer connected to get power and then give power to the thermostat And where is the transformer excactly - lets say on a residential a/c unit with gas furnace

Can't keep bryant thermostat going [ 1 Answers ]

I have a bryant thermostat that when I set it to 75 it kicks off at 70 and the aux heat comes on and the temperature starts dropping and it gets very cold in here. I don't have a manual to know how to program to stay at 75 or to kick in when it drops below. I hope you can help me I put it on hold...

How to get a bryant thermostat running again [ 2 Answers ]

I have a digital thermostat bryant and the screen went blank how do I fix it its for a air conditioner

Thermostat displays AC when heat is on [ 2 Answers ]

My Honeywell Chronotherm III thermostat is set on heat and it blows hot for a while then the LCD says "HEAT - AC" and it starts to blow cold. Then it goes back to blowing hot then back to cold, etc. the thermostat clicks continuously as this happens. Help

View more questions Search