Ask Experts Questions for FREE Help !
Ask
    aufdencamps's Avatar
    aufdencamps Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 5, 2009, 06:18 PM
    Cant keep bryant thermostat going
    I have a bryant thermostat that when I set it to 75 it kicks off at 70 and the aux heat comes on and the temperature starts dropping and it gets very cold in here. I don't have a manual to know how to program to stay at 75 or to kick in when it drops below. I hope you can help me I put it on hold but it doesn't seem to be doing any good and I don't know what e-heat or auto means under the mode button.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    Oct 5, 2009, 08:09 PM

    If the thermostat has an E-heat you must have a heat pump. If you have just switched the thermostat the wiring could be wrong.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing a Bryant thermostat with an RTH230B [ 2 Answers ]

Honeywell asks you to connect to Rh, Rc, W, Y, G. The existing Bryant thermostat uses R, G, Y1, W1 and blue wire to C. The Honeywell online wizard doesn't recognize this model however it seems like I may want to connect a jumper from Rh to Rc and then connect R to either Rh or Rc, W1 to W, Y1 to...

AC Temperature Variation Bryant Evolution Thermostat [ 1 Answers ]

I have a Bryant Evolution Control Thermostat (SYSTXBBUID01-B). I've noticed while running the Air Conditioner the condenser comes on sooner than it should. For example, the temperature is set to cool at 79 degrees; the actual temperature shown on the thermostat reads 77 degrees, yet the condenser...

Hunter thermostat compatibility with Bryant Furnace [ 6 Answers ]

Hello. I have had a Hunter Auto Saver 550 7-day programmable thermostat for several years and recently had my furnace replaced with a Bryant 345MAV. Since the furnace replacement, my heating bills are very high - even compared to the stay-at-home neighbor with the new baby! At the last HVAC...

How to get a bryant thermostat running again [ 2 Answers ]

I have a digital thermostat bryant and the screen went blank how do I fix it its for a air conditioner

Bryant furnace to a Hunter programmable thermostat [ 1 Answers ]

I am trying to hook up a programmable hunter thermostat model # 44360 to a bryant system and heat pump, I have 6 wires coming out of the wall one green, red, orange, blue, yellow and white, the hunter thermostatha g, rc, rh, y/o, w/b, and y1 can any body tell me what goes where? Jmt

View more questions Search