Ask Experts Questions for FREE Help !
Ask
    sweetlady9911's Avatar
    sweetlady9911 Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Nov 17, 2011, 06:47 PM
    Need help with a furnace that hasn't worked since a power outage
    I have a Goodman furnace that is relatively new, and it was working properly until we had a power outage. Now all I get is cold air blowing. Help me please, we are freezing in Ferndale, Michigan. What do I need to do? I checked the fuse box, and all circuits are on.
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
    		  
    #2

    Nov 17, 2011, 08:24 PM
    Have you checked to see if your unit was equipt with an external fuse box? It should be located near the unit and have long cylindrical fuses in it or bar fuses. If they don't have a glass window you will need a ohm meter to check them. Be sure to turn off all power to that circuit before attempting to check those type of fuses if it has them.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Nov 19, 2011, 06:52 AM
    If you can give us the model number and type of heater you have we may be able to help you. You will need to check things with a meter. DrTom4444
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Homart 867 Gas Furnace won't work after power outage [ 10 Answers ]

I have two Homart 867 Gas furnaces. After a lengthy power outage yesterday they won't turn back on. I was able to manually light the pilot and switch the regulator (? Name ?) to open vs. auto in order to heat my house, but when I turn it back to Auto it cuts off the gas to the burner and no heat...

My furnace won't exnite after power outage! [ 2 Answers ]

I have a Day & Night furnace Model # 80CD-12A Series 152, It was working fine until we had a power outage. Now the pilot light has a flame, but when I turn the thermostat on the burners don't exnite. Do I need to turn the (furnance) gas totally off and restart the whole system? Is there a safety...

Concord furnace start up after power outage [ 7 Answers ]

Hi everyone, I have a 3 year old Concord model CG90UA. Having a problem re-lighting the pilot after a power outage. Have followed the procedure in the manual. The Honeywell controller is flashing an error code 4 flashes. This refers to a problem with the limit or rollout switch open? Have tried...

Furnace blows cold air after power outage [ 1 Answers ]

My furnace made a loud noise as the power went out yesterday. The electricity is back on now, but the furnace only blows cold air? Is this something I can correct myself?

AC after power outage [ 2 Answers ]

After coming back from a family trip, we found that there had been a power outage. Several breakers were off position and some electronics (especially telephone) are completely dead. Now, after resetting the breakers, all the power problems are OK except AC. The control panel of AC seems...

View more questions Search