 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hot plate went out and replaced , now the gas gas shut off to the furnace
Hello, my carrier heater heater ignitOR number LH33Z5002 went out. We didn't know so we tried starting the heater over and over again. Ignitor replaced but now the gas has shut off due to safety reason. How do I reset or restart gas supply.
|
||||
Check out some similar questions!
I was told that I should probably get a new gas furnace because (I quote from service ticket): "Upon inspecting operations found flame becoming erratic when blower comes on. Used inspection mirror and searched as far as it could reach. I noticed significant rusting and what appeared to be...
We have a power vented gas hot water heater that heats the water fantastically, however the fan is getting noiser and noiser my question is can you replace just the fan?
I am trying to find a “very small part” for an old Coleman Gas Furnace Model 7956-C-856. The part number and name of the part is as follows: Seal Plate SI-7945-166. I hope someone out there knows where I can find this. The heater works fine, but you really need this seal. Thank you. Please...
My gas furnace will go through it's cycles... turns on,ignitor glows gas comes on,then the flames then the blower blows. Gas shuts off,blower cools the furnace,supposed to shut off but it starts the cycle again.It won't completely shut off till I turn the theromostate off.Please help. Tamara
I'm hoping some one can help. I've been without heat for a week. I have a nordyne g3ra096c-16 furnace. The problem was the ignitor would glow but the gas valve wouldn't open. I tried to trouble shot it myself but had to call a technician. He came and said it was the circuit board and would cost...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
